How to Use BaoFeng Programming Software:
If you own a BaoFeng FengYi Digital Multi-System, you will need to know how to use its programming software.
With the right instructions, you can use the software to change the functions of your system and increase its capabilities. In this article, you will learn how to install the software, print a reference card, and configure your settings.
Installing the software:
If you want to program your BaoFeng BF-888S, you will need to connect it to your PC and install some software. The good news is that the company has provided you with all the tools you need to get it working properly.
You can download the CHIRP software, a program that is designed to help you download radio frequencies to your radio.
If you are a neophyte, this may be a bit overwhelming, but it's definitely not impossible. If you have a PC, you're probably already familiar with the interface, so it's pretty straightforward to get it up and running.
The aforementioned CHIRP program is actually a free download. To install it, you'll need to unzip the contents and follow the installation instructions. The software will work on both Mac and PC, but you might have to install a few drivers first. If you're on the Windows side, you'll want to install the COMX port.
Checking the default channels and programs:
If you have a BaoFeng radio, you've probably wondered how many channels it has, and if you can configure it to your specifications. The good news is that there is a very simple way to do this.
Just hook up your BaoFeng to your PC or Mac, and download the CHIRP software. This is a free program that will do the hard work for you. Now, you can change your favorite channel number, and start to add in some new ones.
The programming software will automatically upload your new configuration to the BaoFeng memory. This is the easiest way to set up your newest radio, and it's a lot easier than it sounds. Plus, it's the smart thing to do.
You can use the CHIRP software to change the frequencies that your BaoFeng is using, and you won't have to worry about losing your favorite songs or channels, thanks to the software's smarts.
In fact, if you haven't yet, you should consider picking up a USB programming cable. This little gem can be found in most major electronics retailers and will make setting up your radio a snap.
Setting the correct COM port:
If you are trying to program your BaoFeng UV-5RV2+ or UV-5R, you should make sure to set the correct COM port. You can find out the COM port number in the Device Manager.
Depending on the operating mode of the radio, the COM port numbers may be different. For example, if you are using a boot loader, you will use a different serial number than if you are using the radio for application. This is because the application port will be higher than the bootloader port.
If you have not properly set the COM port, the software will not be able to communicate with your radio. This can cause a variety of problems. For instance, it will not be able to download.
The frequencies or it can cause a problem when you are trying to download the data from the radio. Alternatively, the radio may not turn on while you are downloading the data.
Once you have determined the correct COM port, you will need to install the programming cable into your radio. You will then be able to program it through your computer.
Downloads links:
Free Download Driver<< (Chirp Cable Driver Setup)
Free Download Software<< (Software Setup)
0 Post a Comment:
Post a Comment